free zen cart template


Sculpey Clay Metallic Silk Screen Kit


$30.00

Add to Cart:


  • Description
  • Details
  • Reviews
Sculpey Clay Silk Screen Kit

The easy way to personalize your polymer and Makins air dry clay projects
Create Custom Designs in Minutes
7 Piece Kit includes:
Silver and Gold Metallic Paints
4 Reusable Silk Screens with 2 Large Patterns and 12 Small Patterns
Squeegee
This kit is so easy to use! For a simple round pendant.

Break off a piece of your favourite colour of clay (either Makins Air Dry Clay or Polymer Clay)
Shape the clay into a ball, set it on parchment paper, teflon sheet or similar and roll it out to desired thickness using graduated spacers.
Cut out a shape with a craft or cookie cutter you like or if you prefer cut out a custom freehand shape.

If using Makins Air dry Clay allow your piece/s to dry naturally before printing. Turn the pieces over a few times while drying to stop the piece from warping. If pieces do warp it is very easy to flaten them under
a heavy object for a short period. Makins Clay does not have a memoery and will flatten beautifully.

Pick out one of the silk screen designs, lay the silk screen on top of your clay shape, shiny side down.

Make sure it is centered, then run your fingers over the screen. Ensure the screen is tight against the clay with no air bubbles.
Squeeze a small amount of the paint (included in the kit) onto the screen just above the design you have selected.

Using the supplied “squeegee” to smooth the paint over the design in the silk screen.
Add more paint if necessary. Peel silk screen off when you have finished.

Allow the paint on shape to dry for a few minutes
.
Use this time to rinse the paint off of the squeegee and silk screen using soap and warm water.
When the paint is dry to the the touch make a hole in the top your pendant for a cord or jump ring

If using polymer clay, lay your piece/s on a baking tray lined with parchment paper and bake per the manufacturers instructions for the thickness of your pieces.

If using Makins Clay - just allow the piece to dry completely and then seal with any good acrylic based sealer.
So easy!
  • Model: K34007
  • Manufactured by: Sculpey

Be the first to write a review.  Write a Review.