free zen cart template


Paragon Digital Xpress-E-12A( INCLUDES SHIPPING**)


$1,985.00

Add to Cart:


  • Description
  • Details
  • Reviews
Paragon Digital Xpress-E-12A INCLUDES SHIPPING**. PLEASE NOTE REGARDING FREE SHIPPING: **Please note that shipping is included door to door to Metropolitan Australian addresses. Paragon Industries designated couriers do not ship to some out of area and rural addresses and an additional local courier fee may apply from your closest Metropolitan City airport to your address. If in doubt please request a quotation door to door to your phyiscal address.
The Paragon Digital Xpress-E-12A fires to 1093°C. Create breathtaking jewellery or small keepsakes in silver clay, enameling, china painting, glass, lost wax casting, bronze clay, copper clay or ceramics. Because this the kiln opens from the front, it is ideal for copper enamelling.
Imagine the glass you could sag, slump, and fuse with this kiln. Make small bowls, pendants, earrings, cufflinks, and even bracelets. Enjoy the glittering beauty of dichroics. This kiln will give you years of creative enjoyment.
The Xpress-E-12A comes with the Sentry Xpress digital controller mounted in the kiln base (instead of a side switch box) to save table space. The kiln includes a door safety switch that turns off the element when the door is opened. The controller automatically resumes firing when you close the door.
The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.
Features of the Sentry Xpress 3-key Controller on the Xpress-E-12A
Design programs with up to 8 segments (steps) in Ramp-Hold mode.
Fire to a single temperature at a single speed in the simplified Single Speed mode.
Ramp-Hold mode can store 4 programs.
Skip a segment in Ramp-Hold during firing without stopping the kiln to reprogram.
Change the target temperature in Ramp-Hold during firing without stopping the kiln to reprogram.
Hold (soak) the temperature in both Single Speed and Ramp-Hold. Experiment with Hold to improve colour saturation of china paints.
Add Hold Time during firing without stopping the kiln to reprogram.
Control both heating and cooling in Ramp-Hold.
Program Review lets you check the program you are about to fire.
Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Use this to remind yourself to check on the kiln.
Temperature displays throughout firing and cooling in your choice of °F or °C.
Thermocouple Offset adjusts the thermocouple readout.
Set the Delay to turn on the kiln later to suit your schedule.
Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
LED Lights show whether you are in program, review, or firing mode.
Colorful, illustrated instruction manual. Download it from the “Additional Information” section below to review these features in more detail.
The Xpress-E-12A heating element, exposed in dropped, recessed insulating firebrick grooves, is easy to replace if ever necessary. The 2 1/2” thick firebricks store plenty of heat for slow cooling through the glass annealing range. For small glass pieces used as jewellery, you can anneal without having to turn the element back on during cooling. (If extra heat is necessary to anneal large pieces, that is easy. Just program a slow cooling segment in Ramp-Hold mode.) The firebricks store heat for quick temperature recovery after removing a copper enameling piece.
The thermocouple is protected with a high-nickel stainless steel sheath for long life. A switch on the front panel turns off power to the controller when the kiln is not in use.
Unlatch and open the door with one hand; the latch operates so smoothly that delicate copper enameling or silver clay pieces remain undisturbed while opening or closing the door. The door opens smoothly on a heavy-duty 1/2” hinge shaft. No extra stand is needed; the built-in base stays cool even during extended hold times.
The interior is large enough to fire a 10” bronze/copper clay stainless steel container. A vent hole in the top, complete with tapered vent plug, is designed for lost wax casting. You can also vent combustible cork clay and other fillers used with silver clay.
Specially designed cartons and foam padding assure that the kiln will arrive safely.
Paragon kilns are built to be dependable. They are loaded with attention to details, such as the costly nickel-plated copper wire with high temperature glass-braided insulation. Wires are fastened to the elements with heat-dissipating connectors refined and proven over many years in Paragon kilns.
The Xpress-E-12A has a durable high temperature, water-base finish. Paragon chose water-base paint because of the low emissions during spraying.
Paragon kilns are made in America by skilled workers.
Shipping is direct from the Paragon factory in the USA to the customer in Australia. Shipping cost is included and delivery is 3+- weeks.Please note: in the event that the courier may need to contact the customer regarding the delivery, it is necessary for a contact telephone number to be supplied by all Australian customers who purchase Paragon Kilns.
Chamber Width; 216 mm
Chamber Depth; 305 mm
Chamber Height; 152 mm
Outer Size;356W x 533D x 457H mm
The digital Xpress-E-12A fires to 1093°C
12 month back to base warranty
  • Model: Xpress-E-12A
  • Manufactured by: Paragon

Be the first to write a review.  Write a Review.