free zen cart template


Paragon Fusion-14 Glass Fusing Kiln (INCLUDES SHIPPING**)


$2,270.00

Add to Cart:


  • Description
  • Details
  • Reviews
Paragon Fusion-14 Glass Fusing Kiln (INCLUDES DELIVERY**) PLEASE NOTE REGARDING FREE SHIPPING: **Please note that shipping is included door to door to most Metropolitan Australian addresses but is subject to a final shipping quotation from Paragon Industries. Paragon Industries designated couriers do not ship to some out of area and rural addresses and an additional local courier fee may apply from your closest Metropolitan City airport to your address. If in doubt please request a quotation door to door to your phyiscal address.
Paragon’s square Fusion-14 digital glass kiln operates on a standard household outlet and fires up to nine 100mm x 100mm glass tiles.
Fire small glass bowls, pendants, earrings, cufflinks, and even bracelets and try out the latest glass techniques.
The Fusion-14 heats from the top for even heat distribution across the glass surface. The lid elements are mounted in pinless element grooves. Because the element coils are wider than the groove opening, element pins are no longer needed. This helps eliminate dust in the firing chamber.
Optional Ceramic Fibre Top
The standard Fusion-14 comes with an insulating fire brick top. You can also upgrade your kiln with the optional deluxe ceramic fibre top, which has the same type of pinless groove as the standard top. The fiber top helps keep the kiln interior even cleaner.
Optional Glass Window and Bead Door
Enhance your glass fusing experience with the optional high temperature 25mm x 78mm glass window. It simplifies fusing by enabling you to watch every stage, from softening, to tack fuse, to full fuse. Watch the glass to fine-tune a digital program. (Always wear firing safety glasses, while watching the glass through the window of any kiln.)
You can anneal glass beads with the Fusion-14 by ordering the optional bead door, which mounts to the front of the kiln. Safely cool large, ornate beads through the annealing range.
The Fusion-14 is a very reliable kiln that is covered by a two-year warranty. The temperature sensor, called a thermocouple, is sheathed with high-nickel stainless steel for long life. A heavy steel base supports the reversible brick bottom completely. These features are extra assurance that the Paragon Fusion-14 kiln is built to last. No extra stand is needed.
This reliable kiln also has dual mechanical relays for long life. The digital controller sends a signal to the relays to turn on the heating elements. The two relays in the Fusion-14 last longer than the single relay of many kilns because of the reduced amperage going through each relay.
In addition, you can order the mercury relay upgrade with your new kiln. The mercury relays are ordinarily found only on industrial kilns and outlast mechanical relays. The life of the quiet, reliable mercury relay has been measured in millions of on/off cycles.
Convenient Features
Flip the switch on the front panel to turn off power to the controller when the kiln is not in use.
The large, comfortable wooden lid handle stays cool.
The Fusion-14 control box has a durable high temperature, water-base finish. A water-base paint was selected because of the low emissions during spraying which created a safer working environment for Paragon employees and also helped to cut down on pollution.
The Ease of Digital Firing
The convenience of digital firing i simpressive. The reliable solid-state Sentry Xpress controller continually monitors the firing so there is no need to closely watch the kiln. Regardless it is still recommended to check the kiln occasionally during firing and to monitor it near the expected shutoff time.
The innovative controller helps to achieve consistent results from one firing to the next. The controller has powerful features but is simple to use and easy to learn.
The Sentry Xpress 3-key controller includes two modes: Single Speed and 8-segment Ramp-Hold. Control both heating and cooling with a simple 3-key operation.
Features of the Sentry Xpress 3-key Controller on Paragon Fusion Kilns:
Program up to 8 segments (steps) in Ramp-Hold mode.
Fire to a single temperature at a single speed in Single Speed mode.
Store up to 4 programs in Ramp-Hold mode.
Skip a segment in Ramp-Hold without having to stop the kiln to reprogram. (For instance, you want to skip to the annealing segment.)
Change the target temperature in Ramp-Hold during firing without stopping the kiln to reprogram.
Hold (soak) the temperature in both Single Speed and Ramp-Hold.
Add Hold Time during firing without having to stop the firing to reprogram.
Easily control both heating and cooling in Ramp-Hold.
Program Review lets you check the program you are about to fire.
Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Program an alarm that will remind you to check on the kiln.
Temperature display throughout firing and cooling in your choice of either Fahrenheit or Celsius.
Thermocouple Offset adjusts the thermocouple readout.
Set the Delay to turn on the kiln at a time that best suits your busy schedule.
Error Messages report mechanical problems.
The sealed touch pad keeps out dust and is easy to wipe clean.
LED Lights show whether you are in program, review, or firing mode.
Colourful, illustrated instruction manual included.
Delivery 3+- weeks. Shipping is direct from the Paragon factory in the USA to the customer in Australia. Please note: in the event that the courier may need to contact the customer regarding the delivery, it is necessary for a contact telephone number to be supplied by all Australian customers who purchase Paragon Kilns.
Specifications:
Max. Temperature; 926 C
Chamber volume; 20.67 litres
Chamber width; 356mm
Chamber depth; 165mm
Chamber length; 356mm
Outer size; 660 W x 559 D x 356 H mm
Shipping size; 838 W x 686 D x 559 H mm
Shipping weight; 47.39 kg.
Doorway clearance needed; 660.40 mm

The Fusion-14 Furniture Kit is a Recommended Option Extra
Glass must be fired on a ceramic shelf; never directly on the kiln firing chamber bottom.This kit is designed for the Paragon Fusion-14 Kiln
1 x C-13 - 330mm x 12mm Square Shelf
4 x 25mm wide Square Posts, 12mm long
500g Bag Glass Separator
  • Model: Fusion 14
  • Manufactured by: Paragon

Be the first to write a review.  Write a Review.